R290 Heat Pump Supplier for Europe | Low GWP Heat Pump for for European HVAC distributors, installers, developers and project partners.
EXINDA is an R290 air-to-water heat pump manufacturer and supplier. Our R290 monobloc heat pump range is designed for residential and light-commercial heating, cooling and domestic hot water applications. We support both retrofit projects and new-build developments with product documentation, installation guidance and model-specific European compliance information.
Why Work with EXINDA?
| EXINDA Capability | Value for European Partners |
|---|---|
| R290 air-to-water heat pump solutions | R290 monobloc heat pump options for European residential and light-commercial projects. |
| Retrofit and new-build suitability | Supports product selection for both replacement projects and new developments. |
| Heating, cooling and domestic hot water | One hydronic solution for year-round comfort and hot water applications. |
| Model-specific European documentation | Relevant technical documentation and compliance information for the selected model and market. |
| BAFA-listed models for Germany | Selected models are listed in the BAFA Wärmeerzeuger Portal for the German market. |
| Technical partner support | Product-selection, installation-planning and documentation support for distributors, installers and project partners. |
R290 Air-to-Water Heat Pumps for European Projects
EXINDA supplies R290 monobloc air-to-water heat pumps for projects that require lower-GWP refrigerant technology, reliable hydronic heating performance and practical installation support.
| Application | Typical Project Requirement | EXINDA Support |
| Boiler replacement | Replacing an existing boiler-based heating system | Model selection based on heat load, heat emitters and hydraulic design. |
| New-build homes | Low-temperature heating and domestic hot water | Support for hydronic heating, cooling and hot-water system planning. |
| Radiator retrofit | Existing radiator system with project-specific flow-temperature requirements | Evaluation based on system design, heat-loss calculation and required water temperature. |
| Underfloor heating | Efficient low-temperature hydronic heating | Suitable model and system-configuration support. |
| Domestic hot water | Reliable hot-water production for the building demand | Capacity and tank-configuration evaluation. |
| Residential projects | Heating, cooling and hot-water requirements for homes | R290 air-to-water heat pump solutions for suitable residential applications. |
| Light-commercial projects | Larger or more complex hydronic system requirements | Project-based selection and technical support. |
| Multi-unit and cascade projects | Multiple units required for the project load | Cascade application evaluation, where applicable. |
The correct model selection should always be based on the building heat load, local climate, emitter system, domestic hot water demand and installation design.
European Documentation and Compliance Support
For European distributors and installers, product claims must be supported by clear, model-specific evidence. EXINDA provides relevant documentation according to the applicable product model and destination market.
| Documentation / Evidence | What it supports |
|---|---|
| Heat Pump KEYMARK documentation | Independent European product certification for applicable models |
| CE Declaration of Conformity | Product conformity documentation for applicable EU requirements |
| ErP and energy-label documentation | Energy-performance information for applicable models |
| EPREL product registration | Public EU product information, where required and applicable |
| BAFA Wärmeerzeuger Portal listing | German-market reference for selected eligible heat-generator models |
| Technical datasheets and installation manuals | Product selection, installation planning and commissioning support |
Important: Documentation, certification scope and programme eligibility are model-specific. EXINDA will provide the relevant documents for the selected product model and target market.
R290 Heat Pumps for Retrofit Projects
Retrofit projects require more than simply replacing an old heat source. Installers need to assess the existing heating system, building heat loss, required flow temperature, hydraulic layout and electrical supply.
EXINDA R290 air-to-water heat pumps can be specified for suitable retrofit applications, including boiler replacement projects. Before model selection, our technical team and distribution partners can support evaluation of:
| Item to Review | Why It Matters for the Retrofit |
| Existing radiator or underfloor-heating system | Determines the heat-emitter capacity and required operating conditions. |
| Design flow-temperature requirement | Helps confirm whether the selected heat pump can meet the project heating demand. |
| Building insulation and calculated heat load | Ensures equipment capacity is based on the building’s actual heat-loss requirement. |
| Local winter design temperature | Helps evaluate heating performance under local outdoor conditions. |
| Domestic hot-water demand | Supports correct heat-pump capacity and hot-water tank selection. |
| Existing electrical capacity | Confirms that the electrical supply is suitable for the selected system. |
| Buffer tank, hydraulic components and controls | Helps ensure the complete system is designed for stable operation and commissioning. |
This approach helps installers select a suitable system configuration rather than applying one heat-pump model to every retrofit condition.
R290 Heat Pumps for New-Build Applications
For new-build projects, EXINDA R290 heat pumps can be integrated into hydronic heating, cooling and domestic hot water designs from the planning stage. New-build projects may benefit from early coordination between the developer, HVAC designer, installer and heat-pump supplier. EXINDA supports project discussions around:
| Planning Item | Why It Matters |
|---|---|
| Heat-load and capacity selection | Selects the heat-pump capacity according to the building’s calculated heating and cooling demand. |
| Underfloor heating and low-temperature system design | Helps coordinate the heat pump with efficient low-temperature hydronic heating systems. |
| Domestic hot-water sizing | Supports selection of a suitable domestic hot-water capacity and tank configuration. |
| Heating and cooling requirements | Defines whether the system needs heating only, or both heating and cooling operation. |
| Outdoor-unit location and service access | Helps allow suitable airflow, installation clearance, noise consideration and future maintenance access. |
| Electrical planning | Confirms that the electrical supply and protection are suitable for the selected heat-pump model. |
| Control and hydraulic configuration | Helps coordinate the heat pump, buffer tank, pumps, valves and control logic for stable system operation. |
Installation Support for HVAC Professionals
EXINDA is not only a product supplier. We work with distribution and installation partners to make product selection, installation planning and commissioning clearer.
Support may include:
Product selection guidance based on project requirements
Technical datasheets and installation manuals
Hydraulic and control information
Commissioning guidance
Troubleshooting support through the appropriate sales or technical channel
Documentation support for applicable European markets
Actual installation time and complexity depend on the project design, site conditions, local regulations and installer experience. We do not position a heat pump as “easy to install” without qualification; instead, we provide the documentation and support required to help qualified installers complete the work correctly.
Straightforward Daily Operation for End Users
A heat pump must be practical for the homeowner after commissioning—not only technically suitable during installation.
EXINDA R290 heat pump systems are designed to support normal daily operation through clear operating modes and installer-configured controls. Depending on the selected model and configuration, users can manage heating, cooling and domestic hot water settings through the supplied controller or compatible control solution.
For best comfort and efficiency, the installer should set up the system correctly during commissioning. End users should normally use the standard operating modes rather than repeatedly changing advanced parameters.
Why European Partners Choose EXINDA
EXINDA combines manufacturer capability with supplier support for partners developing the European heat-pump market.
Who we are
EXINDA is an R290 air-to-water heat pump manufacturer and supplier serving European HVAC partners and projects.
What we support
We support R290 monobloc heat-pump applications for heating, cooling, domestic hot water, retrofit and new-build projects.
Why partners can verify us
We provide model-specific product documentation, applicable European compliance information, project references and selected BAFA-listed models for the German market.
Where EXINDA fits
EXINDA works with distributors, installers, developers and project partners that need a practical R290 heat-pump supply partner for European residential and light-commercial applications.
Frequently Asked Questions
Is EXINDA an R290 heat pump supplier for Europe?
Yes. EXINDA supplies R290 air-to-water heat pumps for European distributors, installers, developers and project partners. We support applications including heating, cooling, domestic hot water, retrofit and new-build projects.
Are EXINDA R290 heat pumps suitable for retrofit projects?
Selected EXINDA R290 air-to-water heat pump models can be evaluated for retrofit projects. Suitability depends on the building heat load, existing heat emitters, required flow temperature, local climate and overall hydraulic design.
Are EXINDA heat pumps suitable for new-build projects?
Yes. EXINDA R290 heat pumps can be specified for suitable new-build heating, cooling and domestic hot water applications. Early coordination with the HVAC designer and installer is recommended.
What documentation can EXINDA provide for Europe?
Depending on the exact model and market, EXINDA can provide technical datasheets, installation manuals, CE Declaration of Conformity, ErP or energy-label information, KEYMARK documentation and BAFA Portal references where applicable.
Speak With an EXINDA R290 Heat Pump Supplier
Looking for an R290 air-to-water heat pump supplier for a European distribution programme, installation project or development? Contact EXINDA to discuss product range, documentation, model selection and market-specific support.
Contact EXINDA:
Website:www.exindagroup.com
Email:info@exindagroup.com